FULLY certified: keeps the vessel in compliance
Our system complies with the new revised IMO G8 regulations of 2020
USCG and IMO MEPC.300 (72) certified, Revised Guidelines (G8) adopted by resolution MEPC.174 (58), the Scienco® InTank ™ treats and neutralizes ballast water in ballast tanks during voyage.
How IT WORKS?
The InTank ™ solution does not have a filter, a distinctive feature unlike most conventional in-line systems. The innovative InTank ™ circulation method is based on the application of active substances to meet IMO D-2 discharge standards and is effective in all water qualities. A small circulation of ballast is drawn aft from one ballast tank at a time, the Active Substance, Sodium Hypochlorite, is added (produced by an EC Cell or from Bulk Chemical storage, or both) to the circulation and returned to the tank. Treatment is monitored using the TRO concentration of the circulated ballast. Processing and neutralization are confirmed and recorded before the start of deballasting. Unique, elegant, robust.
Why should I choose Scienco® InTank™?
During a Port of Call, the ship’s cargo and ballast operations are time critical processes demanding large electrical power. Unlike conventional in-line systems that treat ballast water at uptake alongside during Port of Call, the Scienco® InTank™, a 2nd-generation USCG, IMO Revised G8 Type Approved BWTS, operates InVoyage™. A more convenient, economical and secure time to treat ballast water and stay InCompliance™, since there is sufficient treatment- and crew time, and moreover service load power available.
Operational design limitations such as: port water salinity, turbidity and temperature are of no concern when treatment is performed InVoyage™. With InTank™ BWTS installed, ships can ballast and de-ballast freely and as required for their operations avoiding risks of costly delays and without compromises to vessel operations. Finally, the flexibility to delay treatment of ballast tanks introduces also a means to avoid biological regrowth on longer voyages. Everything remains InControl™.
✓ No impact on cargo operations (delays, slowdown)
✓ Fix a system problem at sea, no change to port stay
✓ Filters Free, no backwash, no flow losses and no downtime
✓ Effective in all ballast water qualities
✓ Gravity ballast or deballast any tanks freely
✓ Complete automatic treatment cycle when at sea, crew-time remains dedicated to vital cargo operations
✓ Flexibility to start treatment timing
✓ No operational and design limitations
✓ Low maintenance, Lower power demand
✓ Ability to treat all Tanks
✓ IMO & USCG Type Approved (new G-8)
✓ Treatment efficacy is assessed and adjusted for during treatment – treats challenging waters
✓ Evidenced report of technical compliance before arrival
✓ Vessel controls when treatment is completed, has control over regrowth potential – Biological compliance InControl
✓ Fix system issue at sea or complete exchange during voyage in compliance with BWMP.
✓ Fully automated concentration-time DOSING and TRO mesurement
✓ No filters allows very small pump room footprint
✓ Only Dosing Module(s) (1m x 1m) installed near ballast line. Other equipment small and distributed
✓ Larger vessel on 5+ day voyage can use smaller, cheaper, system size
✓ A single system can serve multiple independent pontoons
✓ Dry Dock installation is not necessary
✓ Where a Dry Dock is planned much installation work can be completed beforehand
Advantages of our InTank™ Ballast Water Treatment System
When a vessel uses the Scienco® inTank™ BWTS, water is taken-up into ballast tanks with no change to existing operating procedures, i.e. no treatment occurs during uptake. A small portion of ballast water is suctioned from one ballast water tank at a time, passed through the circulation module, and returned to the same ballast water tank through in-tank mixing nozzles. Since the treatment process occurs during voyage, more power is available for the system. In most cases, no changes to shipboard power is necessary.
Temps de Contact / Dosage
The Scienco® inTank™ BWTS process ensures disinfection of ballast water tanks and piping through the application of a targeted CT, which is the product of disinfection Concentration (in milligrams per liter, mg/L) and disinfection contact Time (in hours) measured as total residual oxidant (TRO). The CT approach is commonly employed in the wastewater treatment industry and for municipalities ensuring safe drinking water.
La diffusion inTank
The Scienco® inTank™ mixing system was studied at full-scale with tracer dyes and in computer simulations for all tank configurations. The EPA manual (US EPA 1999b) provides guidance on assigning a “baffling factor” based on a tank’s mixing efficiency. This factor accounts for dead zones and short circuiting of disinfectant application within a tank. Each Scienco® inTank™ system will be engineered to meet or exceed EPA baffling factors to guarantee compliance.
Un système / Deux options
The primary advantage of the Scienco® inTank™ system is its superior method of chemical delivery. Our patented nozzle, coupled with an Scienco® inTank™ distribution piping system is able to treat each ballast tank individually by distributing the active ingredient, sodium hypochlorite (NaOCl).
SciencoFAST® offers multiple options to produce NaOCl: bulk dosing and an onboard, electrochlorination generator. If the bulk-dosing option is selected, the user will simply maintain an adequate level of liquid NaOCl in a bulk-dosing tank. The system then distributes the chemical as needed when the ballast water treating cycle begins. In cases where the owner or operator chooses an on-site generator, seawater from the sea-chest is used to produce NaOCl that is similarly distributed to the ballast tanks. Both means provide a safe and reliable method to deliver the active substance into the ballast tank and ensure a compliant discharge. Regardless of the production method, the chemistry and biological efficacy are identical thus giving the ship owner the ability to choose the most economical method based on vessel ballast capacity and expected voyage time. This is a feature no other system can off er to the industry.
- Salinity: Not Applicable
- Water Temperature: Not Applicable
- Hold Time: >24 Hours (minimum may increase depending on TRO average set point)
- Electrolyte Feed Conductivity: >22 mS/cm (minimum salinity varies with temperature)
- Electrolyte Feed Temperature: 0-35º C
- Minimum Average Total Residual Oxidant (TRO): 2-5 mg/L (varies with hold time)
The dosing modules with the “X” suffix (i.e., DM065X) meet the requirements of 46 CFR 111.105 and may be installed in hazardous locations to which it is certified on a U.S. flag vessel. All other components, including other dosing modules (i.e., DM065G) must remain outside of hazardous locations. The “X” dosing modules may be installed in hazardous locations to which they are certified on a foreign flag vessel subject to approval of the foreign administration.
Do not hesitate to contact us for any project, quote or simple information request.
Our team will get back to you as soon as possible.
ACQUA.ecologie – BioMicrobics FranceEcosite, Route des Salins
+33 (0)9 80 57 99 26
+33 (0)6 76 20 90 36